Electrical Engineering Division

Porcelain Clad Vacuum Circuit Breakers (PCVCBs) are designed & manufactured for outdoor applications for switching & protection in Medium Voltage Transmission & Distribution Networks. Simple construction & less number of moving parts ensure reliable service & safety

Manufacturing range of Indoor & Outdoor type up to 220KV.

11 KV to 220 KV Control & Relay panels
– Indoor and Outdoor Type
– Simplex and Duplex Type
IP 5X for Indoor and IP 55 for Outdoor

As per IS 8623/IEC 60439
Design, Testing, Manufacturing and Supply as per customer requirements with advance technology using world class numerical relays as customer preference

Our range of products include L&T Ti Panels (TTA) Switchboards, Consoul Automatic Power Factor Correction Panels, Control Desks Automation, Drive Panels, Relay, Control Panels, 6300 A Power And Motor Control Centre, DG Synchronizing And Load Sharing Panels,.

Power Control Centre is considered to be the heart of an electrical system in any industry. Therefore it shall offer users long term reliability, safety, low maintenance & testing time.

The MCC panels are conventional to the international standards and are available with multiple power stabs that help in supporting high capacity industrial motors. We can provide number of vertical sections of motor control centres in different amps with mains and lug compartments. We provide controllers with manual or automatic means of starting or stopping the motor, selecting forward or reverse rotation, selecting and regulating the speed, regulating or limiting the torque and protecting against overloads or faults. We can make motor controllers with different features and complexities depending on the task that the motor will be performing.

Most of the commercial and Industrial installations in the country have large electrical loads which are severely inductive in nature, such as motors, large machines, air conditioners, drivers etc. Which results in a severely lagging power factor. This means loss and wastage of energy and heavy penalties by electricity boards. In case of fixed loads this can be taken care by manual switching of capacitors.
However in case of rapidly varying and scattered loads it becomes difficult to maintain a high power factor by manually switching on/off the capacitors in proportion to variation of load within an installation. This drawback is overcome by using an APFC panel (Automatic Power Factor Correction Panel) which not only maintains a high power factor but also eliminates the need for constant manual intervention.

Advantages

»  Economical with faster payback periods.

»  Ability to maintain a constant high power factor.

»  Eliminates low power factor penalties levied by EB.

»  Reduces the KVA demand charges.

»  Improves efficiency of the system by reducing losses.

»  Prevents leading power factor in the installation during low load conditions.

A Drive Panel is used to save the power in the industries where there is huge power requirement like Sugar mills, Steel plants, Refineries, thermal power plants, etc. The Drives are available in AC as well as DC options. These drives are PLC based and saves electricity up to 30%, which in such large plants matters a lot. Drive panels are also manufactured for small machineries also such as agricultural machines and synchronous machines.

DG Synchronizing Panel which is based on load in KW. Hence the actual sharing, starting, stopping & transfers are actual load dependent & not on any other unrealistic parameter like voltage, current. etc. Changing of scheme becomes very easy because of changes are made through software only. There is no changing of wires, adding of components like relays, contactors, which is very time consuming, cumbersome & requiring additional space.
D. G.sets are always tried to run with 80 % to 90 % load factor, where we get maximum efficiency of D.G.sets. This is easily possible with our system.

Power distribution board (PDB)that are precision designed for the power distribution in different sections of an industry, big building, etc. where only short circuit protection and overload protection are required. These protective devices can be fitted with different protective relays which can trip the CB against various types of faults

Minimum Order Quantity

1 Piece

Resistor Value

1-2000 Ohm

Current

Upto 6300 A

Voltage

440 V

Frequency

40 – 50 Hz

Presenting a range of L&T MV bus ducts which can be operated with less than 45 degree Celsius temperature rise over an ambient of 50 degree Celsius. The non-segregated Bus Ducts with inter leaving design are aptly designed for indoor and outdoor installation with IP: 55 degree of protection, We have a capacity of manufacturing up to 2.4 -meter long bus duct in one piece. Widely acclaimed for easy operation and installation our array is further featured with:

· Operational Current : 6300 A

· Operational Voltage : 415 V

· Insulation Voltage : 1000 V

· Ambient Temperature : 45 Deg. C

· Type Test Performed

· IP40/54/55 Protection

· Standard design as well as customized unit available

· Copper/Aluminium bus bar

· Design developed to accommodate future up gradation

Our product range includes a wide range of 6 Kw Single Phase ACDB, 15 Kw ACDB With NVR, 1 Kw Single Phase ACDB, 4 Kw Three Phase ACDB and 2 Kw Single Phase ACDB With Indication Lamp.

We hold expertise in manufacturing and supplying comprehensive range of PLC Panels. PLC Panels, that we offer, are made with the best quality components. High performance PLC Panels, that we offer, are widely used in numerous industries. The PLC Panels are robustly constructed and precision engineered. The Drives are available in AC as well as DC options. These drives are PLC based and saves electricity up to 30%, which in such large plants matters a lot. Mostly it is used in Fire, Air Ventilation systems, Machine Automation etc.

Capacitor-start and capacitor-run motors are widely used in submersible pumps. These are used in a wide range of single-phase applications primarily for starting hard loads. These motors have moderate-to-high starting torque compared to other types of single-phase motors. Starting torque generally ranges from 200 to 350 per cent of normal full-load torque. Our Range starts .2kW to 7.5KW.

We are proud to inform you that we are manufacturer of the 1 to 10 HP solar AC & DC pump controller. We are willing to supply you our highly technological and appreciated controller unit to you. 

Details of Solar Pump controller:

Silent Feature:

 Intelligent v/f control method to manage AC & DC pump with constant water flow output as per solar radiation.

 It can easily match with all kinds of ac submersible and surface pumps.

 Suitable for different environment.

 Can be integrated with existing system.

 It uses minimum system component with maximum output compare to conventional controller.

 Soft staring of pump which controls initial inrush current.

 Inbuilt MPPT tracking facility to get maximum power from solar array.

 Higher efficiency with long life.  Automatic trip on fault.  Durable and highly reliable.

 IP65 Enclosure as per new MNRE guideline.

Control Desk are manufactured depending upon the space and functionality requirement. Use in Steel Plants, Cement Plants. Chemical Plants etc.

Main Features
· As per IEC 61439-3

· Suitable for Flush Mounting and Surface Mounting

· With 100 A Copper Busbar for each phase

· With 2 Neutral bar, 2 Earthbar and Cable ties for Cable management

· Fully insulated busbar & shrouded Neutral bars

· Improved Pan assembly for ease of installation

· Reversible Door for IP 43 DB’s

· With provision for FP MCB/Isolator/RCCB/RCBO as incomer and SP/TP

· MCB’s as outgoing

Server racks & cabinets have been crafted from 14 gauge steel sheet and are welded with four solid pillars in order to comply with the standards of the steel rack. The top and bottom of the racks are welded making use of 5 frames by incorporating reinforced frames which can be welded in the top and bottom. Also the support has been provided at bottom with a depth as required. The 14 gauge frame, reinforced diagonally opposite by making use of four numbers of 50mm four folded 14 gauge frame. The server racks have been provided with front door perforation metal door and also fan has been mounted for adequate ventilation and also lock and key system is provided for these arrangements. We, at Consoul also offer back vented racks with a perforated metal door which also comes with a lock and key system with partly vented plain and side panels, and it is available with dual side panel. Network cabinets are provided and have been mounted on 4 caster wheels with two front wheel brake system. The Standard 42 RU profiles with 650, 800, 1000, and 1200 deep different combinations come along with 600 and 800 with configurations is available.

Technical Data

Basic Frame

Steel folded

Construction

Welded

Top & Bottom Cover

Bolted to Frame with Cable entry exit cut outs

Front Door

Lockable Toughened Glass Door Or Lockable Perforated steel Door

Rear Door

Lockable Steel Door – Plain/ Vented/ Perforated

19″ Mounting Angle

Formed Steel

Std. Equipment Mounting

DIN Std. 10 mm Sq. Slots

Standard Finish

Powder coated

Standard Colour

Grey & Off white OR Black

Standard Mounting

Caster wheels (2 with Brake & 2 without Brake)OR Levelers Or Plinth

Rack Standard

Conforms to DIN 41494 or equivalent standard

Static Load

750 Kg with casters 1250 Kg with Levelers/Plinth

Abbreviations : H – Overall height, h- Usable height, W – Overall width, w- Usable width, D – Overall depth, d- Usable depth
1U = 44.45 MM
Note : Other models can be manufactured on request.